Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to unlock the automatic gearbox of the BMW X6 in case of emergency

Model: BMW X6 MK 2, F16 - Years 2014-2019
Part: Transmission

In this article, we will see how to unlock the automatic transmission of the BMW X6 in case of a transmission failure emergency. This procedure takes less than 1 minute to be carried out and no tools are needed, it will be necessary to load the car onto the tow truck. To unlock the transmission, you must get into the car, start the instrument panel, press and hold the brake pedal, press the side button on the transmission with the brake pressed, move the gear lever forward and hold it forward until it is set to N, at this point release the brake, then press it again and release the electronic handbrake.

Posted on 21 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Emergency Call Battery in the BMW X6?
How to Replace the Emergency Call Battery in the BMW X6?
BMW X6 (2014-2019 / MK 2, F16) To replace the battery that controls the emergency call system in the BMW X6, recline the rear seats and remove the covers from the rear door pillars…
How to Replace the Key Battery for the BMW X6
How to Replace the Key Battery for the BMW X6
BMW X6 (2014-2019 / MK 2, F16) If the smart key for your BMW X6 second generation (model years 2014-2019) has suddenly stopped working due to a completely dead battery, don't worry…
How to replace the battery in the remote control of the BMW X6 F16.
How to replace the battery in the remote control of the BMW X6 F16.
BMW X6 (2014-2019 / MK 2, F16) Thanks to the few simple steps described in the following guide, you will be able to independently replace the battery located inside the remote cont…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos