Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Ct4
    4. : Cadillac Ct4 fuse placement and scheme

Cadillac Ct4 - Video tutorial

Model: Cadillac Ct4 MK 1 - Years 2019-2024
Part: Fuse box
Operation: Cadillac Ct4 fuse placement and scheme

Today we will see, in this short guide, the layout and positioning of the fuses of the Cadillac Ct4, following the instructions below. First we go to identify the internal fuse box, which we find on the driver side (by removing the plastic cover that we find on the side) we see in the sliding guide the diagram of the fuses, which are associated by a code and by the relative amperage. Instead, we find the engine fuse box on the right, next to the battery, by removing the plastic cover; we use the diagram to identify and replace any blown fuse!


Posted on 26 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos