Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Cadillac ATS

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

In this video, you can see the procedure to follow to reset the service light on a Cadillac ATS: to perform this operation, ensure the vehicle is off, release the brake pedal, and press the start switch; you only need to turn on the ignition without starting the engine.

Then, press the accelerator pedal three times within five seconds.

Turn off the ignition and place your foot on the brake pedal. Now, start the vehicle to check that the message has disappeared from the display.

If the message is still present, repeat the procedure, speeding up the pressing of the accelerator pedal within the five seconds.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Cadillac ATS
How to Reset the Service Light on a Cadillac ATS
Cadillac ATS (2013-2019 / MK 1) To reset the service light on a Cadillac ATS, turn on the ignition, press the button located on the right side of the steering wheel to access the Ve…
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
Cadillac ATS (2013-2019 / MK 1) Today, we will go through the instructions to remove and replace the spark plugs in the Cadillac ATS 2.0L. First, open the hood of your car and start…
How to Replace the Key Fob Battery on a Cadillac ATS?
How to Replace the Key Fob Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) In this tutorial, you will see how to replace the key fob battery on a Cadillac ATS. For this simple and quick operation, you will need a replacement…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos