Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2022 Chevrolet Express

Model: Chevrolet Express MK 2 - Years 2003-2024
Part: Service warning light

Today we will see how to reset the engine oil change light on a Chevrolet Express van. To perform this operation, we need to insert the key into the ignition switch and start the instrument panel. Immediately after, press the accelerator pedal fully for three seconds. This operation will reset the service light, in fact, the message "oil change successful" will appear on the instrument panel display; immediately after, the kilometers to the next oil change will be displayed. To completely conclude the reset operation, restart the instrument panel.

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Chevrolet Express
How to Reset the Maintenance Light on a Chevrolet Express
Chevrolet Express (2003-2024 / MK 2) If you notice the yellow maintenance light coming on when starting your Chevrolet Express, don't worry; it's just a reminder that you need to perform…
How to Reset the Service Light on a Chevrolet Express?
How to Reset the Service Light on a Chevrolet Express?
Chevrolet Express (2003-2024 / MK 2) There is a very simple way to reset the service light on Chevrolet Express vehicles, and the author of this video shows us how. First, insert the key…
How to Reset the Oil Light on a Chevrolet Express
How to Reset the Oil Light on a Chevrolet Express
Chevrolet Express (2003-2024 / MK 2) To manually reset the engine oil light on your Chevrolet Express, follow the steps in this mini guide. First, ensure the vehicle is completely off, t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos