Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace engine oil and oil filter on Chevrolet Express 3500

Model: Chevrolet Express MK 1 - Years 1996-2003
Part: Engine oil

Let's find out together, in this guide, how to carry out the routine maintenance coupon, replacing the engine oil and the oil filter, of the Chevrolet Express 3500. First of all, we raise the car and start unscrewing the oil vent bolt that we find below the engine, making it drain in a container for about ten minutes; then we unscrew the oil filter cartridge and replace it with the new one, as shown in the video. Now we also replace the air filter to complete the service to our engine; finally unscrew the filler cap and pour in the new oil!

Posted on 20 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Chevrolet Express oil warning light
How to reset the Chevrolet Express oil warning light
Chevrolet Express (2003-2024 / MK 2) If you want to manually reset the engine oil warning light on your Chevrolet Express, all you have to do is put into practice what is described in th…
How to reset the oil light on the 2008 Chevrolet Express
How to reset the oil light on the 2008 Chevrolet Express
Chevrolet Express (2003-2024 / MK 2) If you are wondering how to correctly reset the engine oil light on your 2008 Chevrolet Express, all you need to do is carefully read the following g…
How to reset the service light on the 2022 Chevrolet Express
How to reset the service light on the 2022 Chevrolet Express
Chevrolet Express (2003-2024 / MK 2) Today we will see how to reset the engine oil change light on a Chevrolet Express van. To perform this operation, we need to insert the key into the …

Other guides you may be interested in

How to Reset the Start&Stop System on the Jeep Compass?

To reset the Start&Stop system on the Jeep Compass, open the bonnet to access the battery located in the engine compartment. The Start&Stop system activates automatically, and no procedure is needed to operate it. To reset the system, disconnect the connector located at the bottom of the battery, then reconnect it after a few seconds. Once reconnected, you can verify that the system has been reset.

Watch the video!


by ScegliAuto

More videos