Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : Chevrolet Spark light reset

Chevrolet Spark - Video tutorial

Model: Chevrolet Spark - Years 2009-2018
Part: Checks and maintenance
Operation: Chevrolet Spark light reset

Let's see the reset of the warning light of a Chevrolet Spark. We get into the car vehicle and turn on the instrument cluster, then locate the maintenance warning light. We use the button on the left of the steering wheel and press the menu. Once in the settings menu, scroll with the up / down button until you find the word "Reset", select with the end lever keypad (as shown in the video) to switch off the maintenance pressure light and exit the settings menu. We check the instrument panel, turning off and on with the key the same. We use the menu for the settings of the various settings.


Posted on 26 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Spark 2016-2022 - What does the engine malfunction light indicate in the Chevrolet Spark? Read Answer
    • Spark 2009-2016 - What problems does the Chevrolet Spark have? Read Answer
    • Spark 2009-2016 - How to fix Chevrolet Spark starting problem? Read Answer
    • Spark 2009-2016 - Why does the Chevrolet Spark have problems starting? Read Answer
    • Spark 2009-2016 - What does code 82 mean in the Chevrolet Spark? Read Answer
    • Spark 2009-2018 - What does the "MIL" light on a Chevrolet Spark mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos