Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to replace the air filter on Chevrolet Equinox

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 3 - Years 2018-2024
Part: Air filter
Operation: How to replace the air filter on Chevrolet Equinox

The air filter inside the engine compartment of your Chevrolet Equinox is one of the most important components of the car and for this reason it is essential to replace it as soon as it shows excessive signs of wear. Let's find out how. First turn off the car completely and let the engine cool down. Then lift the front hood and locate the box containing the filter at the top left. Proceed by unscrewing all the screws that hold the protective cover in place and remove the old filter. At this point all you have to do is insert the new filter, reposition the cover correctly and retighten the screws removed previously.


Posted on 7 May 2024 by ScegliAuto



Replacing the cabin air filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, let's see how to disassemble and replace the Chevrolet Equinox cabin air filter. First of all, we get on board the car, on the passeng
Chevrolet Equinox Air Filter Replacement
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial we will see how to disassemble and replace the Chevrolet Equinox engine air filter, following the instructions below. First, w
How to replace the air filter on Chevrolet Equinox 2008
Chevrolet Equinox (2005-2009 / MK 1) If the air filter inside the engine compartment of your Chevrolet Equinox Mk1 (year 2008) needs to be replaced and you don't know how to do it, don't

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos