Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Maintenance Light on a Chevrolet Orlando

Model: Chevrolet Orlando MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

Video tutorial

When it comes to resetting a service light, remember that you must have completed all the required tasks for the service first. This is for your safety and that of others.

To reset the service light on the Chevrolet Orlando, after closing all four doors, turn the ignition key to position 1, then press "menu" on the lever to the left of the steering wheel. The oil quality percentage will light up. On the same lever, press and hold "set" until you hear a "beep". At this point, turn the key to position 0 and then back to position 1. The light will be off.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Reset the Maintenance Light on a 2012 Chevrolet Orlando
Reset the Maintenance Light on a 2012 Chevrolet Orlando
Chevrolet Orlando (2011-2016 / MK 1) In this tutorial, you will learn how to reset the maintenance light on a Chevrolet Orlando produced from 2011 to 2016. To begin, turn on the instrume…
Where is the Fuse Box on the 2014 Chevrolet Orlando?
Where is the Fuse Box on the 2014 Chevrolet Orlando?
Chevrolet Orlando (2011-2016 / MK 1) To easily locate the fuse box in your 2014 Chevrolet Orlando in just a few seconds, follow the steps outlined in this guide. First, park your Chevrol…
What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?
What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?
Chevrolet Orlando (2011-2016 / MK 1) If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. On…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos