Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outside Mirror on a Chevrolet City Express

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Side mirror

Video tutorial

To remove an outside rearview mirror on a Chevrolet City Express for replacement, follow these steps. Open the driver's door, remove the plastic triangle covering the mirror, and detach the inner door panel to access the connector below that you need to disconnect.

Then, using a universal ratchet with a 10 mm socket, unscrew the three screws holding the mirror. Once all screws are removed, you can pull out the mirror along with the wiring for the side light.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Chevrolet City Express
How to Replace the Rear Brake Shoes on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) Let's briefly go over the steps needed to remove and replace the rear brake shoes on a Chevrolet City Express. First, lift the vehicle at the rear an…
How to Replace the Front Brake Pads on a Chevrolet City Express?
How to Replace the Front Brake Pads on a Chevrolet City Express?
Chevrolet City Express (2015-2018 / MK 1) To replace the front brake pads on a Chevrolet City Express, lift the vehicle so that the corresponding front wheel does not touch the ground. Then, …
How to Replace the Cabin Air Filter in a Chevrolet City Express
How to Replace the Cabin Air Filter in a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door. Next, open the…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos