Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Chevrolet Traverse

Model: Chevrolet Traverse MK 2 - Years 2018-2025
Part: Service warning light

The procedure to manually reset the engine oil light on your Chevrolet Traverse Mk2 is very simple, and with the following guide, you will not encounter any difficulties in performing it. First, turn on the instrument cluster by pressing the appropriate button once. Next, press the down arrow button located on the right side of the steering wheel multiple times and locate the oil life remaining on the display. At this point, just hold the "OK" button for a few seconds. After the reset is complete, release the button, and you are done.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2011 Chevrolet Traverse
How to Reset the Oil Light on a 2011 Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) To manually reset the oil light on your first-generation 2011 Chevrolet Traverse, carefully follow this guide. First, open the hood of the vehicle, t…
How to Reset the Oil Light on a 2011 Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) Resetting the engine oil light that keeps turning on in your 2011 Chevrolet Traverse is a very simple operation that takes just a few seconds. First,…
How to reset the service light on the Chevrolet Traverse
How to reset the service light on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) The service light comes on the instrument panel of the Chevrolet Traverse when it is necessary to perform a car service. After completing all the ste…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos