Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2020 Chevrolet Traverse

Model: Chevrolet Traverse MK 2 - Years 2018-2025
Part: Warning light – error code

If the maintenance light on the dashboard of your 2020 Chevrolet Traverse Mk2 turns on despite having performed the vehicle's service, don't worry; you just need to follow a simple manual reset procedure. Here's how. First, turn on the ignition and navigate through the onboard computer menu using the right arrow button located on the right side of the steering wheel. Go to the vehicle information, scroll down or up, and find the oil life option. Finally, press and hold the OK button until the light reset is complete.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2011 Chevrolet Traverse
How to Reset the Oil Light on a 2011 Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) To manually reset the oil light on your first-generation 2011 Chevrolet Traverse, carefully follow this guide. First, open the hood of the vehicle, t…
How to reset the service light on the Chevrolet Traverse
How to reset the service light on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) The service light comes on the instrument panel of the Chevrolet Traverse when it is necessary to perform a car service. After completing all the ste…
How to Reset the Oil Light on a 2011 Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) Resetting the engine oil light that keeps turning on in your 2011 Chevrolet Traverse is a very simple operation that takes just a few seconds. First,…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos