Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Chevrolet Spark?

Model: Chevrolet Spark M400 - Years 2016-2022
Part: Engine oil

Before doing anything, lift the bonnet and unscrew the oil filler cap. Then, raise the car on a ramp or axle stands. Position yourself underneath the car, place a suitable container under the oil sump, and unscrew the drain plug so that all the used oil flows into the prepared container. While the oil drains, you can replace the oil filter and the engine air filter. Refit the drain plug, lower the car, and top up with new oil through the designated filler neck.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replace the Clutch on the Chevrolet Spark (2014)
Guide to Replace the Clutch on the Chevrolet Spark (2014)
Chevrolet Spark (2009-2016 / M300, MK 1) This guide provides the main instructions needed to remove and replace the clutch on the 2014 Chevrolet Spark, as well as the Matiz. First, open the …
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How to Replace the Rear Light Bulb of the Chevrolet Spark?
How to Replace the Rear Light Bulb of the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) To replace the rear light bulb of the Chevrolet Spark, open the boot lid and loosen the two bolts located on the side of the light, right next to the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos