Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2014-2022
Part: Service warning light

In this short video tutorial, you will see the steps to reset the maintenance light on a Chevrolet Trax. The operation is very quick; first, get inside the vehicle, insert the key into the ignition, and turn it to the first position without starting the engine. At this point, the instrument cluster will be on, and you can access the menu by pressing the "menu" button on the lever to the left of the steering wheel. On the same lever, there is a selector; by rotating it, you can navigate through the settings and stop when you see the oil light appear. Now, press and hold the set/clr button located at the end of the lever on the left side of the steering wheel for at least 5 seconds. The reset will then be complete, and you can verify the successful operation by turning the ignition off and back on.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on the Holden Trax
Reset the Service Light on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) Today, you will learn how to reset the maintenance light for the oil change on the Holden Trax in this video tutorial. First, get inside the vehicle …
How to Replace the Front Bulb on a Holden Trax
How to Replace the Front Bulb on a Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and t…
How to Reset the Service Light on Holden Trax
How to Reset the Service Light on Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, you will see how to reset the expired service light on the Holden Trax. This tutorial also applies to other models of similar age. …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos