Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Cabin air filter

The cabin air filter is located on the passenger side, just behind the glove compartment: to replace it, open the glove compartment door, detach the side cord of the end stop, and press on the sides of the compartment to retract the pins and fully tilt it down; at this point, access the air duct, unclip the side clips securing the cover of the cabin air filter container, and remove the old filter. Clean any dirt residue and insert the new filter (activated carbon type is recommended), ensuring the airflow direction indicated by the arrows is followed.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Chevrolet Cruze (2000-2010 / ) The cabin air filter is located on the passenger side, behind the glove compartment. To access the filter, it is necessary to remove the glove compar…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Chevrolet Cruze (2009-2015 / MK 1, J300) The cabin air filter is located just behind the glove compartment: to replace it, simply unclip the glove compartment to access the filter container.…
How to Replace the Engine Air Filter on a 2014 Chevrolet Cruze
How to Replace the Engine Air Filter on a 2014 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If the engine of your 2014 Chevrolet Cruze frequently overheats due to a worn or dirty air filter and you want to replace it yourself, follow the ins…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos