Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located just behind the glove compartment: to replace it, simply unclip the glove compartment to access the filter container. Once the drawer is open, unclip the end stop cable and press on the sides to retract the sliding guides, allowing the glove compartment to swing down.

At this point, unclip the cover of the cabin air filter container, remove the old filter, and insert the new one, ensuring the airflow direction is correct. Proceed in reverse order to reassemble the glove compartment.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Chevrolet Cruze (2000-2010 / ) The cabin air filter is located on the passenger side, behind the glove compartment. To access the filter, it is necessary to remove the glove compar…
Replacing the Heater Radiator on a Chevrolet Cruze
Replacing the Heater Radiator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In today's video, we will see the main instructions for removing and replacing the heater radiator in the cabin of a second-generation Chevrolet Cruz…
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Let's look at replacing the radiator temperature sensor on a Chevrolet Cruze. Lift the front engine bonnet; to remove the temperature valve, you need…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos