Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Chevrolet Onix?

Model: Chevrolet Onix MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Oil filter

See other generations:
Video tutorial

To change the engine oil of the Chevrolet Onix, lift the vehicle to access the components underneath: here you will find the oil drain plug, which must be opened to collect the oil in a properly positioned container. You will also find the oil filter, which should be removed and replaced with a new one. At this point, open the hood to top off the oil: the cap to be unscrewed is located on the right side of the engine block.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

What Does Code 82 Mean on the Chevrolet Onix?
What Does Code 82 Mean on the Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) Code 82 on a 2021 Chevrolet Onix indicates that it's time to replace the engine oil in the reservoir. After replacing the engine oil, you need to res…
Reset the Engine Oil Light on the Chevrolet Onix
Reset the Engine Oil Light on the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, let's go through the procedure to reset the service light for routine maintenance of the engine oil change on the Chevrolet Onix. First, get i…
How to Reset the Oil Service Light on a Chevrolet Onix?
How to Reset the Oil Service Light on a Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) In this tutorial, you will see how to reset the oil service light on a Chevrolet Onix, a very simple and quick operation. Before proceeding, make sur…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos