Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Front Wiper Relay in the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Windshield wipers

See other generations:
Video tutorial

If the front wipers on your Chevrolet Cruze have suddenly stopped working and the corresponding fuse is intact, check the status of the respective relay, as indicated in this video. The relay is located in the box inside the engine compartment, beneath the black plastic cover next to the battery.

It is labelled R5 and is the second to last in the second column when looking at the box from the front. If faulty, ensure you use a replacement with equivalent specifications and work with the vehicle switched off.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…
Where to Find the Fuse Box on the Chevrolet Cruze
Where to Find the Fuse Box on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) With these simple instructions, you will finally locate the fuse box containing all the fuses for your first-generation Chevrolet Cruze (2009-2015). …
What is the Fuse Box Diagram for the Chevrolet Cruze?
What is the Fuse Box Diagram for the Chevrolet Cruze?
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) In this video, you will see where the fuse boxes of the Chevrolet Cruze are located and their respective diagrams, useful in case you need to check t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos