Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on a 2009 Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Warning light – error code

Immediately after completing the regular maintenance of your 2009 Chevrolet Silverado, it is important to proceed with the manual reset of the corresponding alarm light in order to prevent it from remaining lit on the instrument panel by mistake. To complete the operation, simply follow the following procedure. First, enter the car and make sure the instrument panel is off, then insert the key and start the engine. While the instrument panel is starting up, press the accelerator pedal all the way down three times in a row to complete the maintenance light reset procedure.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Chevrolet Silverado
How to reset the TPMS light on the Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) The Chevrolet Silverado has a fairly simple tire pressure reset mode to follow on its own. In fact, to reset the warning light, we simply need to tur…
How to Reset the Maintenance Light on a 2017 Chevrolet Silverado
How to Reset the Maintenance Light on a 2017 Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To manually reset the maintenance light that turns on in the instrument cluster of your 2017 Chevrolet Silverado MK3, follow the steps outlined in th…
How to reset the TPMS light on the 2017 Chevrolet Silverado
How to reset the TPMS light on the 2017 Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Today we will explain how to reset the tire pressure sensor on a 2017 Chevrolet Silverado vehicle. Press the OK button on the instrument panel until …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos