Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the 2011 Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

After changing the engine oil and the respective filter in your 2011 Chevrolet Silverado, it is important to reset the warning light to prevent it from turning on after each vehicle start. Follow the instructions below, and you will complete the entire procedure without any difficulty.

First, insert the key and turn on the vehicle's electrical system only. Next, press the accelerator pedal three times in a row, and then continue to hold it down for about 10 seconds.

Finally, release it, and the reset is complete.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a 2009 Chevrolet Silverado
How to Reset the Maintenance Light on a 2009 Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Immediately after performing the regular oil change on your 2009 Chevrolet Silverado, reset the maintenance light manually to prevent it from staying…
How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) In this video tutorial, you can see how to reset the oil light on a Chevrolet Silverado by following a few simple steps that will guide you toward pr…
How to Reset the Maintenance Light on a 2017 Chevrolet Silverado
How to Reset the Maintenance Light on a 2017 Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To manually reset the maintenance light that turns on in the instrument cluster of your 2017 Chevrolet Silverado MK3, follow the steps outlined in th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos