Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Chevrolet Silverado Mk4

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Engine oil

This guide shows how to replace the engine oil in a Chevrolet Silverado Mk4. To drain the oil pan, lift the vehicle, locate the drain plug, and position a container for fluid disposal. Remove the 15 mm bolt. Replace the bolt gasket and reinstall it. Clean any oil residue. Locate the oil filter housing near the valve, and remove it with an oil filter wrench. Allow the fluid to drain and replace the filter with a new element, lubricating the gasket. Tighten the filter and clean any oil residue. After lowering the vehicle, open the fill cap in the engine compartment and fill the oil reservoir as specified in the owner's manual. Start the engine for a few minutes and check the fluid level; top off if necessary.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of a Chevrolet Silverado?
How to Change the Engine Oil of a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To change the engine oil of a Chevrolet Silverado, access the underside of the engine compartment, where you will find the oil drain plug that needs …
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
Chevrolet Silverado (2014-2018 / MK 3) This guide shows how to reset the engine oil change light on a Chevrolet Silverado Mk3. No special tools are needed to reset the engine oil life ligh…
Resetting the Oil Change Light on a Chevrolet Silverado
Resetting the Oil Change Light on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) In this brief yet useful video guide, we will see the procedure to reset the engine oil change light on a Chevrolet Silverado, model produced from 20…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos