Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Chevrolet Silverado?

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Engine oil

To change the engine oil of a Chevrolet Silverado, access the underside of the engine compartment, where you will find the oil drain plug that needs to be loosened: this will allow all the used oil to flow out, collecting it in a properly positioned container. After all the oil has drained, you can remove the oil filter, which is also located at the bottom of the engine compartment. Once the filter has been replaced, open the hood and access the engine compartment to top off through the filler located in the center of the engine, under the windshield.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) The procedure to reset the engine oil change light on a Chevrolet Silverado is quite simple. Just follow these instructions closely, and you will com…
How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) To complete the manual reset of the oil light on your new Chevrolet Silverado, follow the steps outlined in this guide. First, get into the vehicle a…
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
Chevrolet Silverado (2014-2018 / MK 3) This guide shows how to reset the engine oil change light on a Chevrolet Silverado Mk3. No special tools are needed to reset the engine oil life ligh…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos