Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Chevrolet Silverado 1500

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Engine oil

In this video, you will learn how to change the engine oil on a Chevrolet Silverado 1500. Start by removing the oil cap and lifting the vehicle. Under the vehicle, locate the oil pan and place a drain pan underneath it to catch the used oil. Begin unscrewing the drain plug and let all the old oil drain out for a few minutes. Next to the oil pan, you will also find the oil filter. Use an oil filter wrench to remove it and let any remaining oil drain out. After everything is removed, clean the area and install a new filter, then replace the drain plug. Finally, add new oil, and you will have completed the job.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Chevrolet Silverado 1500 located?
Where is the fuse box of the Chevrolet Silverado 1500 located?
Chevrolet Silverado (2019-2026 / MK 1) If you want to find the fuse box of the engine on your new Chevrolet Silverado 1500 by yourself, all you have to do is pay attention to the steps des…
Chevrolet Silverado 1500 Fuse Diagram
Chevrolet Silverado 1500 Fuse Diagram
Chevrolet Silverado (2014-2018 / MK 3) In this brief video guide, we will look at the location of the fuse boxes inside a third-generation Chevrolet Silverado 1500, produced from 2014 to 2…
How to replace the cabin air filter of the Chevrolet Silverado 1500
How to replace the cabin air filter of the Chevrolet Silverado 1500
Chevrolet Silverado (2014-2018 / MK 3) To successfully complete the replacement of the cabin air filter of your Chevrolet Silverado 1500, you must follow the steps described in this new mi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos