Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Citroen C4 Picasso Panel

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

See other generations:
Video tutorial

How to remove the Citroen C4 Picasso panel? Don’t worry, see how to proceed in this video. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Begin disassembly: remove the plastic cover of the handle using a lever, then unscrew the internal door handle with a screwdriver, removing the screws in the process. Once all screws are removed, use the lever to detach all the plastic clips securing the door.

Pull the door panel away by hand, disconnecting any electrical connectors. Be careful not to lose any of the snap clips located behind the plastic panel that was removed earlier.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Citroen C4 Picasso
How to Remove the Front Door Panel of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today, learn how to remove and replace the front door panel of the Citroen C4 Picasso. First, open the front door and start unscrewing the fixing scr…
How to Remove the Door Panel on a Citroen C4 Picasso
How to Remove the Door Panel on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today's procedure will allow you to remove and replace the front door panel on a Citroen C4 Picasso. First, open the front door and start by removing…
How to Remove and Clean the Window Switch Panel in a Citroen C4 Grand Picasso
How to Remove and Clean the Window Switch Panel in a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This short video shows how to remove and clean the window switch panel in a Citroen C4 Grand Picasso. First, detach and extract the panel from its co…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos