Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Steering wheel

How to remove the steering wheel of a Citroen C3 with the airbag? In this video, follow these steps: before removing the steering wheel, disconnect the battery terminals. Use an Allen key to unscrew the screws located at the back of the steering wheel cover, then remove the airbag from the steering wheel. Once the airbag is removed, disconnect the power cables for the airbag and the horn, and remove the central anchoring pin of the steering wheel if you need to replace it. Pull the steering wheel out of its housing. To reassemble everything, proceed in reverse order.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel from the Citroen C3
How to Remove the Steering Wheel from the Citroen C3
Citroen C3 (2002-2009 / FC, FN) To remove the steering wheel from the Citroen C3, first remove the airbag. Locate the two slots behind the steering wheel, corresponding to the two '…
Disassembly of the steering wheel of the Citroen C3 MK1 version
Disassembly of the steering wheel of the Citroen C3 MK1 version
Citroen C3 (2002-2009 / FC, FN) To disassemble the complete steering wheel of the Citroen C3 airbag module, sit in the driver's seat, insert a lever into the hole found at the base …
How do you remove the steering wheel on the Citroen C3 2014?
How do you remove the steering wheel on the Citroen C3 2014?
Citroen C3 (2009-2016 / SC) The need to remove the steering wheel of one's car, in this case the 2014 Citroen C3, can be dictated by various reasons, such as repairing or replac…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Why does the power steering of the Citroen C3 not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos