Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light of the Citroen Jumpy MK2.

Model: Citroen Jumpy MK 2 - Years 2007-2016
Part: Service warning light

Upon reaching the mileage specified in the maintenance plan for the Citroen Jumpy, a warning light appears on the dashboard reminding us to replace the engine oil and the corresponding filter. Once the operation is completed, we reset the warning light on the dashboard. Sitting behind the wheel, we press the button located in the speedometer on the right, then press the start button to turn on the instrumentation. We will see a countdown from ten to zero start in the display in the center. Once the countdown is completed, we release the button and turn off the dashboard. Upon the next restart, the absence of the warning light will confirm that the reset has been successful.

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Citroën Jumpy?
How do you reset the Service light on the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) It will be possible to reset the Service light on the instrument panel of the Citroën Jumpy by holding down the button located on the central right s…
How to Reset the Service Light on the Citroën Jumpy
How to Reset the Service Light on the Citroën Jumpy
Citroen Jumpy (2007-2016 / MK 2) To reset the Service light on the Citroën Jumpy, insert the key and turn it clockwise to switch on the instrument cluster. Once it is on, press and h…
How do you reset the Service light on the Citroën Jumpy?
How do you reset the Service light on the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) On the instrument panel of the Citroën Jumpy, it will be possible to make the Service light disappear by turning on the instrument panel, turning the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos