Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Cabin air filter replacement

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Cabin air filter
Operation: Cabin air filter replacement

The pollen filter is located in the engine compartment under the windshield. This filter purifies the air in the passenger compartment avoiding allergies to people sensitive to this manifestation. Get the pollen filter of the same model identical to the original. To access the removal it is necessary to rotate the three knobs of the filter cover, then remove the filter from its housing and then carefully pull it outwards to avoid the dispersion of dust. Clean the housing compartment from any dirt. Put the new cartridge back into the container paying attention to the positioning direction and close the lid with the knobs.


Posted on 28 June 2023 by ScegliAuto



How to remove the citroen Xsara Picasso cabin air filter
Citroen Xsara Picasso (1999-2012 / MK 1) How to replace the cabin pollen filter on the Xsara Picasso? We see in this video how to perform the disassembly: lift the engine hood, remove with a
Cabin air filter replacement
Citroen Xsara Picasso (1999-2012 / MK 1) How to do? The expense for the replacement is minimal, and the operations to replace it are simple. The filter is located in the engine compartment u
How to replace the engine air filter on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to change the engine air filter on Citroen C4 Picasso? Let's see how to proceed: open the car door, pull up the engine compartment opening lever

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos