Do it yourself
Frequently asked questions about cars and motorcycles

How to change power steering oil

Model: Citroen Xsara MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Power steering fluid

Video tutorial

In this video we see an empirical method for changing the power steering oil. In this case it is being changed on a Citroen Xsara, but the method is valid for any type of vehicle. The optimal method would be to disconnect the return hose, place it in a container, start the car, turn the steering wheel to the right and then to the left and let all the oil drain out. With this system the oil is sucked out: there may be a few drops left, but we can be satisfied with that.

We buy a package of the recommended fluid from the manufacturer, and do not skimp on quality. We will also need a suction syringe that we can find for example on Amazon with the code B0BF4NK5FF at a price of 10.95 euros, free delivery for Prime customers.

We suction all the fluid from the reservoir, then we put the car on a jack, turn on the ignition and turn the steering wheel to the right and then to the left, to recover as much fluid as possible. We wait five minutes and then start adding the new oil, repeating the same operation of turning the wheels, making sure no bubbles have formed and waiting a few minutes.

We repeat this procedure three or four times. Take a test drive making as many turns and roundabouts as possible so that the oil is distributed evenly.

Check it again after about a thousand kilometers.


Posted on 23 June 2025 by ScegliAuto


Related tutorials

Citroen Xsara (1997-2006 / MK 1) These short and simple instructions will show us how to disassemble and replace the alternator of the Citroen Xsara. First of all, we open the engine…
Citroen Xsara (1997-2006 / MK 1) Today we will explain how to perform a service on a 2004 Citroen Xsara vehicle. We begin the service by opening the front hood and unscrewing the oil…
Citroen Xsara (1997-2006 / MK 1) Position the vehicle on suitable ramps to facilitate access to the oil sump; place a container to collect the used oil and unscrew the drain plug fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos