Do it yourself
Frequently asked questions about cars and motorcycles

How to perform the service on the Citroen Xsara

Model: Citroen Xsara MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

Video tutorial

Today we will explain how to perform a service on a 2004 Citroen Xsara vehicle. We begin the service by opening the front hood and unscrewing the oil filler cap. Next, we lift the vehicle onto jack stands and, using a torque wrench, we unscrew the oil pan bolt to allow the used oil to drain into a container.

Once finished, we close the oil pan bolt and, with a 27mm socket wrench, we unscrew the bolt from the oil filter housing. We replace the oil filter and lower the vehicle back to the ground.

We complete the engine oil and filter replacement by pouring the necessary amount of oil into the reservoir. We remove the clamp on the air duct and, using an 8mm wrench, we unscrew the screws on the cover of the air filter box and perform the replacement.

To replace the cabin air filter, we get inside the vehicle and remove part of the carpet located in the passenger footwell. We access the filter box and carry out the replacement.


Posted on 3 January 2026 by ScegliAuto


Related tutorials

Citroen Xsara (1997-2006 / MK 1) This guide will show you how to program the key for the Citroen Xsara, following the instructions below. To program the key, you will need specific k…
Citroen Xsara (1997-2006 / MK 1) In the following article, we will explain the procedure for resetting the service light on the Citroen Xsara. This procedure takes less than 1 minute…
Citroen Xsara (1997-2006 / MK 1) In this video, you can see that when a spanner icon appears on the instrument cluster of the Citroen Xsara Picasso between the odometer and the tempe…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos