Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up Brake Fluid on a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Checks and maintenance

Maintaining your car is very important. Pull the bonnet release lever located at the bottom left of the dashboard, then lift the bonnet until it clicks and locate the safety catch to secure it. Identify the brake fluid reservoir located at the top right of the engine bay. Check the fluid level: if it is low, top it up. Clean any spills and close the bonnet.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Brake Fluid Replacement on Citroen C3
Brake Fluid Replacement on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video, see how to replace the brake fluid on a first-generation Citroen C3 or simply top up the fluid. First, open and lift the bonnet. To to…
How to check the fluid levels of the Citroen C3
How to check the fluid levels of the Citroen C3
Citroen C3 (2009-2016 / SC) One of the maintenance operations that must be frequently performed on a car is checking the fluid levels and, if necessary, topping them up. Today w…
How to Replace the Engine Oil and Oil Filter of the Citroen C3 HDI
How to Replace the Engine Oil and Oil Filter of the Citroen C3 HDI
Citroen C3 (2002-2009 / FC, FN) Today, learn how to replace the engine oil and oil filter while performing the routine maintenance service on the Citroen C3 HDI. First, lift the veh…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos