Do it yourself
Frequently asked questions about cars and motorcycles

Localization and diagram of the Citroen C5 MK2

Model: Citroen C5 RD, X7, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

In this video, we see the fuse box diagram of the Citroen C5: inside the cabin there are two fuse boxes, one on the left of the steering wheel, at the bottom of the dashboard, and another behind the glove compartment. To access the latter, the compartment must be opened and the rear cover must be removed.

Inside the engine compartment, we find a third fuse box located between the air intake and the outer bodywork, in front of the driver (left-hand drive). A fourth fuse box is located on the starter battery, and to access it we must disconnect and remove the cover, on which the battery voltages are printed, depending on how the box is positioned.


Posted on 8 September 2025 by ScegliAuto


Related tutorials

Citroen C5 (2000-2008 / DC, MK 1) If one of the electrical outlets stops working suddenly, the cause may be the intervention, in protection, of its fuse. To check it and possibly repl…
Citroen C5 (2008-2017 / RD, X7, MK 2) As shown in this brief video guide, all the fuse and relay diagrams for a second-generation Citroen C5, produced from 2008 to 2017, are displayed. Th…
Citroen C5 (2008-2017 / RD, X7, MK 2) All vehicles, both cars and other categories, are equipped with fuse boxes, inside which we find fuses and often also relays, each dedicated to perfo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos