|
Do it yourself
| |||
| ||||
How to replace the battery of the Citroen C4 Picasso
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013
Today we will explain how to replace the battery of the Citroen C4 Picasso model 1 car. Turn off the vehicle and pull the handbrake, lift the hood release lever to open the hood and access the battery. Remove the engine cover using a Phillips screwdriver to unscrew the 4 screws. Then unscrew the flange fixing screws to remove the air filter; using a Phillips screwdriver, unscrew the clamping ring of the air intake duct and pull the negative terminal. Remove the plastic box cover above the battery using a 13mm socket wrench with extension and unscrew the nut holding the electrical sheath of the box so that the battery can be removed. Disconnect the positive terminal clamp and remove the box by pressing on the plastic tab using a flathead screwdriver. Insert the new battery in its place and connect the positive terminal. Screw the nut that secures the battery to connect the negative terminal. Mount the box cover and connect the air duct hose so that the box and air filter can be installed.
Posted on 23 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2006-2013 /
MK 1)
Today's guide will show you the main steps on how to remove and replace the battery on a Citroen C4 Grand Picasso and C4 Picasso. First, open the bon…
Citroen C4 Picasso
(2006-2013 /
MK 1)
In this guide we will see the instructions that will allow us to disassemble and replace the battery of the Citroen C4 Picasso 1.6 HDi. First of all,…
Citroen C4 Picasso
(2006-2013 /
MK 1)
Is the battery of the Citroen C4 Grand Picasso damaged? Here’s how to replace it. Open the car door and release the front bonnet; lift the bonnet. Re…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.397
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |