Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Citroen C1 located?

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

If you need to connect a diagnostic tool to your second-generation Citroen C1 but don't know where the OBD2 port is located, then all you need to do is carefully read the following guide and follow the described steps. First, get into the car and focus on the driver's side.

At this point, make sure your Citroen C1 is completely off, then shift your gaze to the lower part of the dashboard and locate the OBD2 port you were looking for. Finally, connect the diagnostic tool if you have one, and you're done.


Posted on 26 November 2025 by ScegliAuto


Related tutorials

Where is the OBD Port on the Citroen C1?
Where is the OBD Port on the Citroen C1?
Citroen C1 (2005-2014 / MK 1) To access the OBD port located inside your Citroen C1 first generation, you need to follow the procedure described in this new guide. The first step …
How do you reset the automatic gearbox of the Citroën C1?
How do you reset the automatic gearbox of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) In order to reset the automatic gearbox of the Citroën C1, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be fou…
How to Program the Key of the Citroën C1?
How to Program the Key of the Citroën C1?
Citroen C1 (2014-2022 / MK 2) To program the key of the Citroën C1, insert the blank key into the corresponding ignition barrel. At this point, connect a diagnostic tool to the ve…

    Frequently Asked Questions

    • C1 2014-2022 - Where is the fuel switch of a Citroen C1 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos