|
Do it yourself
| |||
| ||||
How to change the transmission oil in the Citroen C1.
Model: Citroen C1
MK 2
- Years 2014-2022
On your Citroën C1, the oil change for the transmission is performed from underneath the car while keeping it level, as the correct level is achieved “flush with the hole.” Secure the car on jack stands or a lift, wear gloves and goggles, and work with the transmission warm, not hot. Before draining, take care of the fill/level plug: it should be loosened to ensure you can later reinsert the oil. Once you are sure that the upper plug is moving, position a container under the transmission and open the drain plug to let the used oil flow out. Allow it to drain until the flow reduces, then clean the area around the plugs and close the drain with its seal in good condition, tightening without forcing it. Next, proceed to fill through the level/fill hole using a pump or a syringe with a tube, which allows you to push the oil into the transmission even in tight spaces. Continue until the oil reaches the correct level and begins to spill out of the hole: that is the practical reference when the car is level. At that point, close the level/fill plug, clean up any spills, and check for leaks. After a short drive, check under the car to ensure the area around the plugs is dry.
Posted on 3 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C1
(2005-2014 /
MK 1)
To change the gearbox oil in a Citroën C1, access the underside of the car and locate the gearbox, which is situated next to the front right control …
Citroen C1
(2005-2014 /
MK 1)
In this short and simple guide, discover how to replace the gear knob on the Citroen C1, as well as on the Peugeot 107 and Toyota Aygo. First, get in…
Citroen C1
(2005-2014 /
MK 1)
On the Citroën C1 1.0, the oil change with filter replacement is performed with the engine cold and the vehicle secured. The car is lifted at the app…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |