Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the Citroen C4.

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Today we will explain how to replace the rear headlight bulbs of the Citroen C4 model MK2. The bulbs we will use are Bolk H7 12 Volt. To perform the replacement, we turn off the car and pull the handbrake, open the vehicle's trunk, and remove the side cover.

We unscrew the screw with a 10mm wrench, and after disconnecting the connector, we remove the headlight from its housing.

We unscrew the two screws on the plastic support of the ceiling light to remove the burnt bulbs and insert the new ones. After replacing the bulbs, we screw back the two screws of the ceiling light and connect the headlight to the connector.

We install the headlight in its housing, screw on the lock nut, close the cover, and the trunk to test the functionality of the bulbs.


Posted on 19 January 2026 by ScegliAuto


Related tutorials

Replacing Rear Bulb on Citroen C4
Replacing Rear Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replace the blown bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight. U…
How to Replace Rear Headlight Bulb on Citroen C4
How to Replace Rear Headlight Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replace the damaged bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight.…
How to Change the Rear Light Bulb on a Citroen C4
How to Change the Rear Light Bulb on a Citroen C4
Citroen C4 (2010-2018 / MK 2) To replace the rear light bulb on a Citroen C4, open the boot and locate the two fixing screws of the light cluster on the inner edge. Unscrew them c…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos