Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Rear Headlight Bulb on Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Tail light bulb

Replace the damaged bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight. Unscrew the securing screws (located at the rear of the headlight). Pull out the bulb holder from the rear headlight and extract the damaged bulbs with a screwdriver. Fit the new bulbs of the same type and size. Insert the bulb holder back into the housing of the headlight. Refit the headlight into the body and tighten it. Test the correct operation of the new bulbs.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Bulb on Citroen C4
Replacing Rear Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replace the blown bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight. U…
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
Citroen C4 (2004-2010 / MK 1) Before you begin, open the boot of your Citroen C4. Start by unclipping and moving the internal side cover of the boot. Next, unscrew and remove the …
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2004-2010 / MK 1) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs replacing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos