|
Do it yourself
| |||
| ||||
How to replace the bulbs of the right front headlight of the Citroen C4 MK2 model
Model: Citroen C4
MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
The replacement of the front headlight bulbs of the Citroen C4 model mk2 can be done in just 5 minutes, thanks to our short video tutorial. To change the high beam bulbs, we must remove the cover on the grille side. We grip the plastic support of the position light bulb and rotate it a quarter turn to the left; to remove the bulb, push and pull it outwards. Insert the new bulb into the headlight, rotating it a quarter turn to the right. Immediately after, we move on to replacing the high beam bulb. We grip the black connector to disconnect it. Move the support tabs outwards and remove the bulb. Insert the H1 bulb, connect it to the connector, and close the grille cover. To replace the low beam bulb, remove the body side cover. Disconnect the connector and move the support tabs outwards to remove the bulb. Insert the H7 bulb, connect it to the connector, and close the cover. To replace the turn signal bulbs, disconnect the connector and move the black tab to remove the bulb. Insert the new bulb, connect it to the connector, and close the hood.
Posted on 15 June 2025 by ScegliAuto
Related tutorials
Citroen C4
(2004-2010 /
MK 1)
Replace the damaged bulbs in the front headlight of a Citroen C4. Open the front bonnet and secure it. Remove the plastic cover to access the front h…
Citroen C4
(2010-2018 /
MK 2)
Today we will explain how to replace the rear headlight bulbs of the Citroen C4 model MK2. The bulbs we will use are Bolk H7 12 Volt. To perform the …
Citroen C4
(2004-2010 /
MK 1)
Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Remove the inspection cover from t…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.085
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |