Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Citroen C4 Panel

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Door trim panel

How to remove the Citroen C4 panel? Let's see how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic cover of the handle and door opening. With a screwdriver, unscrew the internal handle of the door and remove the screws. Once all screws are removed, use the lever to detach all the plastic clips securing the door. Pull the door panel away by hand, disconnect any wiring harness clips. Be careful not to lose any clips located behind the removed plastic panel.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of the Citroën C4?
How to Remove the Rear Door Panel of the Citroën C4?
Citroen C4 (2004-2010 / MK 1) To remove the door panel of the Citroën C4, loosen the screws that secure it to its housing: these screws are located next to the window lift lever a…
How do you remove the door panel in the Citroen C4 2?
How do you remove the door panel in the Citroen C4 2?
Citroen C4 (2010-2018 / MK 2) The vehicle used in the demonstration is a Citroen C4 Picasso, but it is also suitable for the Citroen C4 2. The need to remove the door panel arises…
How to dismantle the interior panel of the door, in the Citroen C4 2?
How to dismantle the interior panel of the door, in the Citroen C4 2?
Citroen C4 (2010-2018 / MK 2) The video presented here shows how to disassemble the internal panel of a door on a Citroen Picasso, specifying that the operational sequence is the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos