Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Water Temperature Sensor from a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Engine coolant temperature sensor

In this video, learn how to remove the water temperature sensor from a Citroen C4. Lift the bonnet and secure it; to remove the sensor, you need to take off the engine soundproofing panel. Unscrew the fasteners with a socket spanner if you need to remove the entire piece. Now disconnect the connector from the temperature sensor valve, remove the sensor, and fit a new one. Refit the engine cover panel over the car engine with all the fasteners attached. Test the correct functioning of the sensor by starting the car.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2004-2010 / MK 1) In this video, we will see how to remove and replace the water pump and timing belt on a Citroen C4 1.6i, following the instructions below. First, li…
Citroen C4 (2014-2020 / Cactus) In this video, we will see how to replace the AdBlue sensor on a Citroen C4 Cactus: first, we need to lift the front part of the car. We would have p…
Citroen C4 (2004-2010 / MK 1) Before you can start, open the bonnet of your Citroen C4. First, unclip and remove the upper engine cover. Once done, unscrew the bolts and screws th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos