Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Engine Fuse Box on the Citroen Jumper 3

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Fuse box

If you want to find the engine fuse box in your Citroen Jumper third series in just a few seconds, follow the steps described in this guide. First, allow the engine to cool for a few minutes if it is still hot, then proceed to lift the front bonnet of the vehicle. Once done, position the safety support correctly and locate the fuse box on the right side of the engine bay. Finally, remove the cover of the box to access the fuses, but do not intervene on them without first disconnecting the battery.

Posted on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuse Boxes in the Citroen Jumper?
Where are the Fuse Boxes in the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) The Citroën Jumper produced from 2006 to 2014 contains three fuse boxes. The first fuse box is located under the front bonnet, specifically next to t…
Where is the fuse box located in the cabin of the Citroen Jumper 2?
Where is the fuse box located in the cabin of the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) In the following mini guide, we will discover together where the fuse box of the interior of your second series Citroen Jumper is located. First, you…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos