Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

Learn how to remove and replace the timing belt on a Citroen Berlingo. Lift the car on a column lift, remove the front wheel and the right wheel arch cover using a screwdriver.

Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Using a socket wrench, unscrew the securing bolt of the tensioner pulley, then remove the water pump as shown in the video.

Fit the new water pump (if removed), the tensioner and the belt itself; tighten everything with the socket wrench. Finally, refit the wheel arch cover and the wheel with the tyre onto the vehicle.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

When and How to Change the Timing Belt on a Citroen Berlingo
When and How to Change the Timing Belt on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) .. Below are the details on when and how to replace the timing belt on a Citroen Berlingo; for the 1.6 HDI engine, the manufacturer recommends.. …
Guide to Replacing the Timing Belt of the Citroen Berlingo 1.9
Guide to Replacing the Timing Belt of the Citroen Berlingo 1.9
Citroen Berlingo (1996-2013 / MK 1) Below are the main instructions to help you with the disassembly and replacement of the timing belt on the Citroen Berlingo 1.9 Diesel. First, open t…
Instructions for Replacing the Timing Belt on Citroen Berlingo 1.9 Diesel
Instructions for Replacing the Timing Belt on Citroen Berlingo 1.9 Diesel
Citroen Berlingo (1996-2013 / MK 1) In today's tutorial, you will see the main instructions for removing and replacing the timing belt on a Citroen Berlingo 1.9 Diesel, first series. Fi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos