|
Do it yourself
| |||
| ||||
How to replace the cabin fan resistor in the Citroën Xsara Picasso?
Model: Citroen Xsara Picasso
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
You can replace the cabin fan resistor in the Citroën Xsara Picasso by opening the glove compartment on the passenger side: once opened, detach the clips that secure it to its housing. This will give you access to the components inside the dashboard: at this point, you will be able to locate the fan which will have the corresponding resistor installed at the back. This must be disconnected so that it can then be replaced with a new one: this way, you can reinsert all the removed components.
Posted on 21 November 2026 by ScegliAuto
Related tutorials
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Before you can start, sit in the front passenger seat. Begin by unscrewing the screws that secure the glove compartment to the dashboard, then remove…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Before you begin, sit in the front passenger seat of your Citroen Xsara Picasso. Start by removing the glove compartment by unscrewing the relevant b…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
How to replace the cabin fan resistor on a Xsara Picasso? Get a screwdriver or a cordless drill, open the glove compartment and unscrew the securing …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Air Conditioner on the Mercedes E-Class?
To reset the air conditioner on the Mercedes E-Class, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press and hold the REST and 0 buttons located on the center panel of the dashboard. While holding these buttons, you will notice that the air conditioning settings will be restored to their default values. After the reset procedure is complete, you can turn off the ignition again by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |