Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heater Radiator on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Heater core

Video tutorial

Is the air heating in your car no longer working? Let's see how to remove the heater radiator in a Citroen Xsara Picasso. Remove the plastic covering of the centre tunnel (located under the centre tunnel on the left).

Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heater radiator. Once all the operations are completed, proceed to the engine bay. Disconnect the plastic engine cover and detach the two hoses (unscrew the securing clips if present) from the radiator that enters into the cabin, allowing the fluid to drain.

Disconnect the radiator from the pipes in the cabin.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Guide to Removing the Heater Radiator from the Citroen Xsara Picasso
Guide to Removing the Heater Radiator from the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Discover how to remove and replace the cabin heater radiator on the Citroen Xsara Picasso by following the instructions below. First, open the bonnet…
How do you replace the heating radiator of the Citroën Xsara Picasso?
How do you replace the heating radiator of the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In order to replace the heating radiator of the Citroën Xsara Picasso, you need to remove the dashboard panel located on the right side of the driver…
How to Remove the Heating Fan on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see how to remove the heating fan on a Citroen Xsara Picasso. Remove the plastic covering from the central tunnel (located under the central tu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos