Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Shock Absorbers on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Suspension system

In this video tutorial, you will learn how to dismantle and replace the front shock absorbers on a Citroen Xsara Picasso. First, open the bonnet of your car and unscrew the suspension mounting bolt using a socket spanner; then lift the vehicle and remove the front wheel. At this point, unscrew the central hub bolt and remove the bolts to disconnect the braking system from the wishbone, as illustrated in the video; all that is left is to unscrew the suspension anchoring pin to remove it and replace it with the new one!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before starting, lift the rear of your Citroen Xsara Picasso. Begin by loosening and removing the bolts that secure the rear wheel to the hub, then r…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How do you replace the radiator of the Citroën Xsara Picasso?
How do you replace the radiator of the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In order to replace the radiator of the Citroën Xsara Picasso, you will need to open the hood so that you can identify the components inside the engi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos