Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Central Display from a Citroen C4 Dashboard

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Dashboard

Before you can start, sit in the driver’s seat of your Citroen C4. Begin by prising off and removing the display frame by pulling it towards you. This will expose the screws that secure the display to the dashboard. Next, unscrew and remove these screws. At this point, you can extract the display from its housing and disconnect the rear electrical connector. Once you complete this step, you can finally remove the central display from the dashboard, and the disassembly will be complete.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Instrument Cluster Panel on a Citroen C4 Cactus
Removing the Instrument Cluster Panel on a Citroen C4 Cactus
Citroen C4 (2010-2018 / MK 2) In today's tutorial, you will see the steps to remove the instrument cluster display on a Citroen C4 Cactus, following the instructions below. First,…
How to Reset the Service Light on a Citroën C4
How to Reset the Service Light on a Citroën C4
Citroen C4 (2010-2018 / MK 2) Updating the mileage for the next service is a simple and quick operation to perform on all vehicles. To carry out this procedure on a Citroën C4, tu…
How to Remove and Reinstall the Sat Nav/Radio on a Citroen C4 Cactus
How to Remove and Reinstall the Sat Nav/Radio on a Citroen C4 Cactus
Citroen C4 (2010-2018 / MK 2) In this tutorial video, see how to remove and reinstall the sat nav and radio display on a Citroen C4 Cactus, in simple and quick steps. First, get i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos