Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Citroen C4.

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Service warning light

When it is time to change the engine oil of the Citroen C4, a wrench icon appears on the central display to warn us. After replacing the oil, we must reset the control system. Sitting in the driver's seat, we press and hold the button on the left of the three buttons below the central display, turn the key to start the instrument panel, we will see a countdown from ten to zero on the central display, after which we can release the button and turn off the panel. Upon the next restart, the wrench icon will turn off.

Posted on 29 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Citroën C4?
How do you reset the Service light on the Citroën C4?
Citroen C4 (2004-2010 / MK 1) It will be possible to completely remove the Service light from the instrument panel of the Citroën C4 by holding down the TRIP button located in the…
How to Reset the Service Light on a Citroen C4 2021
How to Reset the Service Light on a Citroen C4 2021
Citroen C4 (2020-2026 / MK 3) If you have just serviced your new Citroen C4 but the warning light continues to illuminate steadily at each start, proceed with the following reset …
How to reset the service light on the Citroen C4 Cactus
How to reset the service light on the Citroen C4 Cactus
Citroen C4 (2010-2018 / MK 2) To complete the manual reset procedure of the warning light related to vehicle maintenance (commonly called the service light), you must follow the s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos