Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission fluid

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Initially, you won't be able to see the gearbox where you'll change the oil, as you need to remove the battery first. To do this, disconnect the two terminals (always remove the negative terminal first) and unscrew the securing bolts.

Now you can unscrew the cover of the gearbox, then go underneath the vehicle and unscrew the special 7 mm bolt shown in the video. Collect the oil in a container, tighten the hole with the bolt, and fill from the top housing, finally screw the cap back on. It is recommended to use synthetic oil for manual gearbox 75W-80.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Reset the Automatic Gearbox of the Citroën C4
How to Reset the Automatic Gearbox of the Citroën C4
Citroen C4 (2004-2010 / MK 1) To reset the automatic gearbox of the Citroën C4, enter the cabin, close the door, and press the brake pedal without turning on the ignition. Hold th…
How do you reset the automatic gearbox EAT6 of the Citroën C4?
How do you reset the automatic gearbox EAT6 of the Citroën C4?
Citroen C4 (2014-2020 / Cactus) It will be possible to reset the EAT6 automatic gearbox of the Citroën C4 by first turning on the instrument panel: once the panel has been turned on…
Replacing the Gear Knob on a Citroen C4
Replacing the Gear Knob on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to remove and replace the gear knob on a first-generation Citroen C4. First, get inside the car and remove the gear gaiter,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos