Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the BSI unit on a Citroen C3

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Warning light – error code

In this video, you can see how to reset the BSI unit in the Citroen C3 by following a few simple steps: first, get into your vehicle and leave the driver's door open. Insert the ignition key and turn on the ignition without starting the engine (keep the engine off); once this step is done, close the door and turn off the ignition. Then, reopen the door and turn the ignition back on; simultaneously move the wiper and main beam lever forward and then release them. Wait for thirty seconds and then turn off the ignition. The BSI unit has been reset.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BSI on Peugeot and Citroen vehicles
How to reset the BSI on Peugeot and Citroen vehicles
Citroen C3 Picasso (2008-2017 / MK 1) Let's see how to reset the BSI on Peugeot and Citroen vehicles: this operation is used to resolve electrical malfunctions and can activate reserve ci…
How to Reset the BSI on the Peugeot 3008?
How to Reset the BSI on the Peugeot 3008?
Citroen C3 Picasso (2008-2017 / MK 1) If you are experiencing malfunctions with various electrical and electronic components of the vehicle, such as electric window lifts getting stuck or…
How to Remove the Battery from the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Once you have opened the bonnet of your Citroen C3 Picasso, locate the battery on the right side; disconnect the negative terminal and remove the con…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos