Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Odometer on a Citroën Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

Video tutorial

To reset the trip odometer on a Citroën Xsara Picasso, turn the key to position two to power on the instrument cluster. The kilometres indicated by the trip odometer are displayed at the bottom left of the screen in the centre of the dashboard.

To reset the value, press the button located immediately next to the display, which is marked "000.0". Pressing this button will return the distance travelled to zero. To verify that the reset has occurred correctly, switch off and then restart the instrument cluster.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Perform the Service Reset on a Citroën Xsara Picasso
How to Perform the Service Reset on a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) On the Citroën Xsara Picasso, resetting the service light is done directly from the instrument cluster without diagnostic tools. In the video, the ca…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Where are the Fuses in the Citroen Xsara Picasso?
Where are the Fuses in the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Although there is only one official model of the Citroen Xsara Picasso, the fuse layout is not the same for all vehicles in this line. It changes bas…

Other guides you may be interested in

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Why does the airbag warning light come on on Citroen Xsara Picasso? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos