Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Service warning light

This video tutorial shows the steps to reset the service light on a Citroen Xsara Picasso; the procedure is valid for cars produced from 1999 to 2010. First, get into the car and insert the key into the ignition slot without starting the engine. Next, use the reset button located on the left side of the instrument cluster. Press and hold this button for 10 seconds while turning the key to switch on the ignition. After ten seconds, release the button and turn off and then on the ignition to check if the operation was successful.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the XSara Picasso
How to Reset the Service Light on the XSara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) If you own a Citroen XSara Picasso and want to manually reset the service light without needing a professional, follow the steps below. First, sit in…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Where are the Fuses in the Citroen Xsara Picasso?
Where are the Fuses in the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Although there is only one official model of the Citroen Xsara Picasso, the fuse layout is not the same for all vehicles in this line. It changes bas…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos