Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Camshaft Replacement

Model: Citroen Zx MK 1 - Years 1991-1998
Part: Engine

This tutorial shows how to install a new camshaft on a Citroen ZX. The camshaft converts the vertical motion of the pistons into the circular movement that drives the wheels while simultaneously opening and closing the valves for the gas mixtures in the cylinders. After greasing the lobes, insert the camshaft into its housing. Once inserted, secure it in place. After placing a template around the lifters, rest the camshaft on the cylinder head. After positioning the rocker arms, proceed to tighten the valves. Next, fit the timing gear, ensuring it is correctly positioned and tightened; then install the belt and manually check the timing. Finally, perform the valve timing.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Camshaft Oil Seal
Replacing the Camshaft Oil Seal
Citroen Zx (1991-1998 / MK 1) When performing engine maintenance that requires the disassembly and removal of gaskets and oil seals, it is always advisable to replace them with ne…
Diagnosis of a serious electrical fault on a Citroen ZX
Diagnosis of a serious electrical fault on a Citroen ZX
Citroen Zx (1991-1998 / MK 1) In this video, the YouTuber suspects an electrical problem on his Citroen ZX and tries to unplug a plastic connector located in the engine compartmen…
Automobile Manifold Gasket Replacement
Automobile Manifold Gasket Replacement
Citroen Zx (1991-1998 / MK 1) The exhaust manifold connects part of the automobile to the exhaust system. Its function is to connect the gases produced by the combustion of fuel f…

Other guides you may be interested in

How to Replace the Right Fog Light Bulb on a Ford Fiesta

Replacing the fog light bulb on the passenger side, which uses an H11 fitting (the bulb holder also integrates the connector for the power supply), can be done either by accessing from underneath the vehicle by removing some covers, or more simply by dismantling the headlight. Once the headlight is removed, it is easy to reach the fog light housing and release the bulb by rotating the entire bulb holder. Disconnect the connector, connect the new bulb, and insert it into the bulb holder, rotating it until it locks in place.

Watch the video!


by ScegliAuto

More videos